EMF shielded Work Lamp

DescriptionThis solid adjustable lamp is well manufactured. A friction hinge with a wing nut at the bottom and central joint holds the lamp arm reliably in the position once elected. A reliable work light for long-term use.The light is equipped with a E27 socket and matching equipped Adapter for G9 bulbs – Higher lumen values for more light , lower wattages for lower power consumption.Available in aluminium / silver or black satin finishes.Metal tubes, metal joints rugged construction, reliable positioning.Aluminum reflector, Diameter 19 cm 2-color painted, Outside in lamp color, inside white matte Arm length 110 cm (steel profiles) 60 cm base point – to middle joint – up reflector 50 cm Toggle Switch 2-pole on the reflector.Screen basket of the illuminant E27 candle against alternating electric field Stainless steel spring spiral Screen (alternating electric field, 50 Hz mains voltage). Metal housing, shielded power cable (aluminum tape, drain wire) Verification by the screen standards TCO’99 (MPR II, DIN EN 50279) Limits for all measuring method below factor 20 and more Reduction of the alternating magnetic field by twisting power cord until illuminant Cable laid 10 (single cores ten times per meter twisted together) Mains cable, shielded angle safety plug DIN 49441, 2 m black Supply voltage 230 V / 50 Hz Class 1 (with protective conductor) Examination individually to 100% Warranty 3 years extended Scope of supply: shielded work lamp with connecting cable 2m black, Metal reflector, E27, max. 60 Watt / supplied with 48 W.