Description EMF Paint This exceptional EMF Paint by Safe Living Technologies Inc. has a pure-acrylics binder for good adhesion on a wide variety of surfaces and substrates, including latex paint, construction board, cement, plaster, polystyrene and masonry. RF-ECO 5G Shielding Paint is water-based and environmentally friendly. This paint is a non-toxic high quality pure acrylic binder which is environmentally friendly, and contains only 0.2 g/L VOC’s – which is classified as a Zero VOC Paint. Apply RF-ECO 5G Shielding Paint as a primer with a brush and roller, just like any other paint, and then cover it with two layers of interior or exterior topcoat paint. For greater effectiveness, you can apply two layers of shielding paint—or even three in extreme cases. Infused with natural graphite and carbon black for shielding, RF-ECO 5G Shielding Paint is electrically conductive and black in colour. Grounding the paint is required and to be completed by a locally licensed electrician. Comes in an easy-to-pour container with a storage lid. Shelf life is 1 years (unopened). If stored properly, it can last up to an additional 1 – 2 years. Store in a cool, frost-free location and out of the reach of children. Keep opened containers tightly closed and in a cool location. Features: Shielding attenuation at 1 GHz: 39 dB / 99.987% (172 SqFt/Gal.) 39 dB with 1 layer, 45 dB with 2 layers, and 51 dB with 3 layers Available in 1 US gallon or 1L Coverage: 43 – 86 SqFt/L VOC: This paint is a non-toxic high quality pure acrylic binder which offers excellent ecology and contains only 0.2 g/L VOC’s – which is classified as a Zero VOC Paint. High water resistance Shelf life: TBD Corrosion resistant; contains no metallic particles Paint is frost-resistant Topcoat: Paint is black, so you will likely require two topcoats of regular water base latex paint to fully cover the black. You must ground the paint, which requires a few accessories. Safe Living Technologies also sells the GSX Conductive Tape, which conducts on both sides and enhances the paint’s conductivity. For exterior projects, you can mix a fiber additive into the paint. Developed in accordance with strict ecological criteria. The carbon black used has the lowest emissions on the market. The graphite is natural and untreated. Safe Living Technologies Inc. does not use graphene. Wide Usage: Living Areas: Protects against EMFs including cell towers, 5G antennas, cordless phones, Wi-Fi routers, television, radio stations, and more. Workplace: Prevents interception of data from wireless networks and potentially bugged conference rooms. Science and Medical Facilities: Provides shielding of electromagnetic interference (EMI) sensitive facilities and equipment, and safeguards sensitive technical equipment. Electronic Industry: Reduces interference between electrical devices & equipment. Ingredients: Water, natural graphite, pure acrylics dispersion, carbon black, plus additives and preservative. Additional Product Information: CAUTION: This paint is electrically conductive. All painted areas must be grounded by a licensed electrician. All connections should be visually inspected and tested, and comply with local electrical codes. In all shielded areas / shielded rooms, a personal protection circuit-breaker should be installed. Always switch off power supply before starting to perform shielding work, and before application of shielding paint. For ground only, use Safe and Sound Ground-Connection ES/EB. Avoid contacting ground at other points. WARNING: Like all electrical products and installations, EMR-Shielding Products can and do pose a risk to consumer safety if improperly handled. Safe Living Technologies Inc. therefore disclaims all responsibility for damages to persons and material due to improper handling of Safe and Sound products. NOTE: As there are various paints available worldwide, we can never give a guarantee for specific combinations. In addition, many purely mineral paints and ecological paints adhere poorly on the graphite surface of our shielding paints. We always recommend applying a test coating on a sampling area before processing. Our paint has a very low VOC content and others may as well but they still may not be compatible with an environmentally sensitive person. If this is a concern, we would suggest testing various paints being used for environmental compatibility on their own and combined together in an small area before starting your paint project.
